How to Resolve “Temporary failure in name resolution” Issue

This is usually a name resolution error and shows that your DNS server cannot resolve the domain names into their respective IP addresses. This can present a grave challenge as you will not be able to update, upgrade, or even install any software packages on your Linux system.

In this article, we will look at some of the causes of the ‘temporary failure in name resolution‘ error and solutions to this issue.

1. Missing or Wrongly Configured resolv.conf File

The /etc/resolv.conf file is the resolver configuration file in Linux systems. It contains the DNS entries that help your Linux system resolve domain names into IP addresses.

If this file is not present or is there but you are still having the name resolution error, create or open the /etc/resolv.conf file in a text editor with root privileges.

sudo nano /etc/resolv.conf
OR
sudo vim /etc/resolv.conf

Next, add Google’s public DNS servers with the nameserver keyword followed by the IP address of the DNS server.

nameserver 8.8.8.8
nameserver 8.8.4.4

Save the changes and restart the systemd-resolved service as shown.

sudo systemctl restart systemd-resolved.service

It’s also prudent to check the status of the resolver and ensure that it is active and running as expected:

sudo systemctl status systemd-resolved.service

Then try pinging any website and the issue should be sorted out.

ping google.com

After confirming your network connection, make sure to edit the /etc/resolv.conf file to prevent it from being overwritten by network management tools. 

Note: Some Linux distributions, especially those using NetworkManager, may automatically manage the /etc/resolv.conf file. If that’s the case, manually editing the file might not have a lasting effect.

Instead, you may need to configure DNS settings through the appropriate network management tool or configuration files for your specific distribution. Be sure to consult your distribution’s documentation or support resources for the recommended method of configuring DNS in such cases.

2. Firewall Restrictions

If the first solution did not work for you, firewall restrictions could be preventing you from successfully performing DNS queries. Check your firewall and confirm if port 53 (used for DNS – Domain Name Resolution ) and port 43 (used for whois lookup) are open. If the ports are blocked, open them as follows:

Open DNS Ports on UFW Firewall

On Debian-based distributions, you need to open ports 53 & 43 on the UFW firewall by running the commands below:

sudo ufw allow 53/tcp
sudo ufw allow 43/tcp
sudo ufw reload

Open DNS Ports on FirewallD Firewall

On RHEL-based distributions, you need to open ports 53 & 43 on the Firewalld firewall by running the commands below.

sudo firewall-cmd --add-port=53/tcp --permanent
sudo firewall-cmd --add-port=43/tcp --permanent
sudo firewall-cmd --reload

It’s our hope that you now have an idea about the ‘temporary failure in name resolution‘ error and how you can go about fixing it in a few simple steps. As always, your feedback is much appreciated.